Inclusion - adding a device

Summary

1. Go to settings  → devices → add new device.
2. Select Z-Wave or Zigbee → start → put the device in inclusion mode.
3. After the device is included, give it a name and place it in a room.

Z-wave inclusion

1. Go to settings → devices → add new device.
2. Select Z-Wave.
3. If you want the device to be added quickly, check Include known devices faster option.
4. Select level of security:
   • force non-secure inclusion - preferable unless specified otherwise
   • secure inclusion - for security devices (i.e. door locks, fire alarms)
   • S2 inclusion with PIN - for devices which support this kind of security (information about it can be found in their manual). The PIN code is 5 digits and is often found on a device.
5. Press start.
6. Put the device in inclusion mode. Check the device’s user manual for information on how to do so.
   Note: If you have a battery device and it is not included within 20 seconds, set the device in inclusion mode again. Once the device is found, wait approx. 20-30 seconds and then put the device in inclusion mode once more.
7. After successful inclusion go to settings → devices → select your device → settings → give a device a name and place in a room.

Zigbee inclusion

1. Go to settings → devices → add new device.
2. Select Zigbee → start.
3. Put the device in inclusion mode. Check the device’s user manual for information on how to do so.
   Note: If you have a battery device and it is not included within 20 seconds, set the device in inclusion mode again. Once the device is found, wait approx. 20-30 seconds and then put the device in inclusion mode once more.
4. When the device appears on the screen, tap on “Ok, done!”.
5. Go to settings → devices → select your device → settings → give a device a name and place it in a room.

Note: The maximum number of Zigbee devices you can connect to the Smarthub is 70.