- Motion sensor
Installing Philips Hue Adapter
- Go to site settings
- Activate Beta app store
- Go to setting-App store
- Install Philips Hue adapter
When Philips Hue is downloaded you can use Thingsplex developer mode to configure the adapter.
How to connect
- Go to Systems config screen to configure adapter.
huein a list of discovered resources
Get connection parametersthe system should find the bridge or multiple bridges and show response
- If you only have one Philips Hue bridge the next step is to press the
Linkbutton on the Philips hue bridge . *If you have multiple Philips Hue bridges see clarification below.
connectbutton in Thingsplex.
Your Philips Hue devices should now be synced and show up in the bottom of all devices under settings in the app. The devices will also be listed under Generic adapter view in Thingsplex (you have to select adapter in dropdown view)
If making changes to your Hue system like adding devices etc then go to Systems, select Hue and hit
*If you have multiple bridges , you should set only one in
bridge_id field. Field
discovered will contain list of discovered bridges . You can find last 5 characters from the id printed on the bridge in order to link the correct bridge.
Setting up lights in the app
Go to Setup - Devices - scroll to the bottom. All your Philips hue devices should be listed there. Set a name, place them in a room and set the correct functionality.