April 2017

Futurehome Application

New

  • Added padding to the header when the client is opened by an iOS device
  • Wigets to control modes on Android
  • Improved security modal and card
The security card and modal has gone through a bit of an overhaul in order to provide you with additional information regarding the security state of your house as well as provide you with more accurate security information.
Your house's security state is divided into three states, "secure", "partially secure" and "not secure".The "secure" state indicates that all doors and windows are locked and closed. The "partially secure" state indicates that things are secure if you are home and awake. However, if you go to sleep or leave the house while partially secure, the house will enter the "not secure" state.
 
To give a practical example: if you are home and one of your windows are open, your house's state will be "partially secure". Perhaps you are just airing out a little? However, if you go to bed (activate "sleep" mode) without closing the window, your house's state will indicate "not secure". The "not secure" state indicates that your house is not secure in it's current state. This usually indicates that you are away and there are doors or windows left open or unlocked.
Alternatively if presence is detected while you are away or on vacation, your house will of course not be secure, and unless you have deactivated the "presence while away" notification, you will be notified of an intruder. Garage doors are now also part of the security devices and will help determine your house's security state. Lastly, devices that can detect opening and closing that have been set to "other" will _not_ have an impact on your house's security state. Is therefore important that if you mount a magnet contact (or similar) on a door or window that you specify in the app that this is in fact a door or a window.

Changes

  • Use dockers `--cache-from` to use previous latest as cache for the new build to improve build speed.
  • Most modals that are not directly tied to destructive actions now use the default theme color.
  • Minor changes to the presence and security icon as they were thicker than they should.
  • Added header padding for Android app.

    Fixes/Updates

  • Fixes an issue where the native iOS header spacing was not static.
  • Updated the calibration description for the Aeotec Garage Door Controller.
  • Fixed an error in the shutter action controller that would set the shutter to open instead of opening.
  • Fixes an issue where users with no access to modes were still able to see modes and shortcuts.
  • Fixes an issue where an empty room would appear in the security modal if you had a garage door that could not be controlled in the room.
  • Fixes an issue where it was not possible to disable the heating when door / window is open trigger.
  • Fixes an issue where if you had many sites, the bottom one would be hidden by the bottom nav bar.
  • Fixes an issue where the toggle information modal would not open when accessing triggers for the first time.
  • Fixes an issue where the top-padding intended for iOS and Android only applications were also applied to the info-modal window.
  • Fixes an issue where dashboard blocks would show even though the shown functionality was not available for the user.
  • Fixes an issue where a timer would show as enabled all the time, even though it was set to be disabled.
  • Fixes an issue where statistics time did not properly take timezone into account when fetching and displaying data.
  • Fixes an issue where it was not possible to delete a site if the smarthub was offline.
  • Fixes an issue where if you only had roller shutters, the dashboard block to control them would not show up.
  • Fixes an issue where it was possible to change a site's name even though you were not the owner.

 

  • Connectivity issues handling on network change and on time passed
  • Transparent status bar
  • UI changes to match new design
  • Notification changes (grouping of same ones, updates only time)
  • Emergency call on fire alarm fix
  • Oauth token refresh on app opening (if refresh token is still valid)

     

    Futurehome Smarthub

    New

    • n/A

    Fixes/Updates

    • When triggering shortcuts, modes and timers: ignore additional device
      actions for devices which are configured to be controlled by heating

    • When including Popp Smoke Sensor, wait 10s before adding the controller
      to lifeline association group, and setting configuration parameters

    • For Popp Smoke Sensors which have already been included, setup lifeline
      association and configuration parameters again

    • Fixes an issue where timers that triggered shortcuts were not loaded
      correctly after core restart - and would do nothing. After the
      update, those timers will automatically work as they should.
    • When including Popp Smoke Sensor, wait 30s instead of 10s before
      adding the controller to lifeline association group, and setting
      configuration parameters

    • For Popp Smoke Sensors which have already been included, setup lifeline
      association and configuration parameters once, 30s after core startup

    • For Popp Smoke Sensors which have already been included, setup lifeline
      association 5 times on every core start up, 2-4 minutes between each

    • Added API to add associations for Z-Wave devices

    • Support external temperature probe for

      • Fibaro Door / Window Sensor (FGK-101)
      • Qubino Flush Dimmer (ZMNHDD1, ZMNHDA2)
    • Report 'uptime' in milliseconds

    Futurehome Services & Integrations

    New

    • N/A

    Fixes/Updates

    • N/A

       

Har du flere spørsmål? Send oss en henvendelse